Glastender C-IBA-30-ED 30" x 19" 116 lbs. Extra Deep Liner Underbar Ice Bin

At Glastender, we've built our reputation as pioneers in bar fabrication, refrigeration, and more. Now we're looking for leaders like you to help us shape the future.

• CHOICE Extra Deep Underbar Ice Bin
• With built-in 10-circuit cold plate
• 30"W x 19"D
• 116 lbs. ice capacity
• Backsplash with open channel for beverage line access
• 14-1/2" deep bin liner
• PVC plastic breaker strip around ice bin liner
• Stainless steel construction
• Stainless steel legs with adjustable stainless steel bullet feet
• ETL-Sanitation (NOTE: Made to order not returnable)

• Extra deep liner for extra ice capacity
• All stainless steel construction
• PVC plastic breaker strip around ice bin liner acts as a thermal barrier to prevent heat transfer
• Eco friendly foamed-in-place insulation has zero impact on global warming or ozone depletion
• Adjustable thermoplastic bullet feet
• Ten circuit available with all 24" and wider models (add suffix '-CP10-ED' to model number)
• Backsplash is an open channel to provide access for beverage lines

• C-SR-X — Single speed rail, where X is specified as the length in inches.
• C-DR-X — Double speed rail, where X is specified as the length in inches.
• IBCA-X or IBCB-X — Two-piece, sliding stainless steel cover for 19" (A) or 24" (B) deep models, respectively, where X is specified as the length of the ice bin in inches. Deduct 6" from cover length for one bottle well and 12" for two bottle wells.
• BW3 or BW4 — 3 or 4 bottle well for potable ice for 19" (A) or 24" (B) deep models, respectively. May be positioned left or right. If two are ordered, they are positioned one at each side.
• BR3 or BR4 — 3 or 4 bottle rack for non-potable ice for 19" (A) or 24" (B) deep models, respectively. One rack may be ordered for each 6" of ice bin length. Not for use with sliding cover. Not for use with 6" ice bins.
• CCD — Condiment dispenser
• IBD-H-A or IBD-H-B — Ice bin divider for 19" (A) or 24" (B) deep models, respectively.

Drain
• Non-cold plate model: 1-1/2″ tailpiece
• Ten circuit cold plate model ‘-CP10’: 3/4″ MPT

Cold Plate (models with '-CP10-ED' suffix)
• Ten circuit available with all 24″ and wider models
• Connection is 5/16″ O.D. stainless steel tubing with swaged end

Liner Depth
• 14"

Legs
• 1-5/8" diameter, 16 gauge stainless steel
• Thermoplastic bullet feet

Materials
• 20 gauge stainless steel
• PVC plastic breaker strip around ice bin liner