Eagle Group CCS-72-2 72" Spec-Bar Combination Cocktail Station with 18" Recesssed Workboard

Heavy gauge type 304 stainless steel body, legs, leg channels and cross rails. Models offered with (12" or 18") recessed workboard with 1 1/2" drain and stainless steel removable perforated insert, or with (12" or 18") tiered liquor display with ABS for sound deadening—#CCS-72 has both. (36" or 42") combination foamed-in-place insulated ice chest with bottle holders. Two 7/8" x 27/8" tubing access holes in top of backsplash. Condiment dispenser. 12" single wet waste sink with T&S faucet and perforated lift-out strainer. Stainless steel blender shelf with towel ring and rear cord access hole. Stainless steel double speed rail with ABS for sound deadening, and stainless steel adjustable bullet feet.

• Back, backsplash, sides, bottom, front panel, liquor steps, ice chests and bowls are 20 gauge stainless steel.
• Blender shelf is 18 gauge stainless steel.
• Blender shelf sides, speed rail sides, and liquor display sides are 14 gauge stainless steel.
• Legs are constructed of 15/8" (41mm) diameter 16 gauge type 304 stainless steel with stainless steel bullet feet.
• Leg channels are 16 gauge stainless steel.
• Blender station, wet waste sink, double speed rail, condiment dispenser, and combination ice chest are standard.
• Ice chest drain is 11/2" (38mm) NPS, with 4" (102mm) long tailpiece.
• 12" (305mm) wet waste and workboard drains are 11/2" (38mm) I.P.S. threaded drain with nut and washer.
• Liquor display or recessed workboard available.
• Tubing access holes are 7/8" x 2 7/8" (22 x 73mm). Capacity per hole is 12 lines of 1/4" x 3/8" (6 x 10mm) O.D. nylon braided tubing.
• T&S faucets are mounted on 4" (102mm) centers, and accept 1/2" NPT sink leads. Hot and cold water connections required.
• Sink bowl dimensions are 11 1/2" x 9 1/4" x 6" (292 x 235 x 152mm) deep.
• Perforated sink strainer