Mr Winter 8X10FWFR 8' x 10' Indoor Walk-In Freezer Box with Floor
Mr Winter 8X10FWFR 8' x 10' Indoor Walk-In Freezer Box with Floor
Bullets list
- Includes Floor
- Panels Only
- 26-gauge stucco embossed finish
- 4" Thermal resistant panel
- NSF approved gasket
- Self-closing door hinge
Mr Winter 8X10FWFR 8' x 10' Indoor Walk-In Freezer Box with Floor
**Mr. Winter Walk-in Coolers and Freezers ships ONLY TO THE EAST OF THE MISSISSIPPI/EAST COAST for sales inquiries to the WEST of the Mississippi use the Norlake or Amerikooler brand.
*All units are NSF Listed, EISA Compliant, 100% Made in the
USA
*Upon purchase you will be provided a technical drawing where you will
choose door location and hinge position.
Mr. Winter is a Walk-In Cooler and Freezer manufacturer out of Florida. All
Walk-In units are USA made.
FINISH
Walls and ceilings: Standard 26 Gauge Stucco Embossed Galvalume Finish with a
weather Protective aluminum and zinc alloy, 26 Gauge Stucco Embossed White
Galvalume or 26 Gauge Stainless Steel 2B Finish with PVC.
FLOORS
Heavy gauge smooth aluminum. Optional Stainless Steel & Marine Plywood
Reinforcement.
INSULATION
4” TRP for walk-in coolers and freezers. EISA of 2007 & US D.O.E
Certified Compliant.
COOLERS
4” Thermal Resistant Panel*
ASTM Test C-518
Flame spread and smoke development 5/190 ASTM Test E84
FREEZERS
4” Thermal Resistant Panel*
ASTM Test C-518
Flame spread and smoke development 15/250 ASTM Test E84
JOINT
Panels have factory installed, NSF approved gasket, which insures a proper
seal and better appearance. Standard gaskets are 1/8” closed cell
neoprene.
DOORS
Standard door size is 34” X 76”. Includes: Self closing hinges,
automatic door closer, keyed entry latch with interior safety release, vapor
proof light fixture, pilot light switch and dial thermometer. Freezer doors
include anti condensate heater wire and pressure relief vent.
CONSTRUCTION
Panel facing shall be laminated to rigid insulation with urethane based
adhesive under pressure to insure a strong and permanent bond. Panels are of
100% insulation (non wood construction) and all panel edges are tongue and
groove. Panel connectors are factory installed rotary cam type speed locks.
Floor panels are designed to sustain a load of 500 lbs. per square foot. Where
floor panels are not required, 1” x 1” aluminum angle or NSF
plastic screed will be furnished to insure a proper seal. Optional
reinforcements can be added for heavier loads.
INSTALLATION
To help reduce installation time, all panels are marked to correspond with the
installation drawing supplied by the factory. Also provided, one allen wrench
along with miscellaneous installation materials
Approvals
-
NSF
-
EISA
Documents
Product Specifications
Manufacturer | Mr. Winter |
---|---|
SKU | 8X10FWFR |
Condition | New |
Length (in.) | 96.00 |
Depth (in.) | 120 |
Height (in.) | 90 |
Horsepower | 2 1/2 HP |
Approval | NSF, EISA |